Reference: 3DT-SF-v3-EVO
Scanfly EVO is the 3DT multi-platform mobile mapping LiDAR system: compact and cable-free, up to 1,280,000 points/s with a range of 130 m and a precision of 3 cm, at just 1.6 kg.
With Scanfly EVO the same instrument works on a drone, on your back with the backpack or on board a vehicle: a single sensor for three types of survey. The design is cable-free and the accessories mount without tools: with the DJI Skyport adapter it flies on the drone, with the vehicle and backpack kit it surveys on the road or on foot.
Scanfly EVO weighs 1.6 kg and measures 181×133×142 mm: it is easy to transport in its case and does not weigh down whoever carries it on their back. This compact body houses the multichannel LiDAR head, the survey grade inertial navigation system with 336-channel GNSS and integrated WiFi, while the data is saved to a removable external USB flash drive.
Scanfly EVO captures up to 1,280,000 points per second with a maximum range of 130 m. The 3 cm precision and accuracy (RMS 1σ at 50 m, in PPK with open-sky GNSS) provide reliable data for technical work.
The Scanfly EVO LiDAR head has 32 channels, rotates at 5 to 20 Hz and captures up to 1,280,000 points/s, with a maximum range of 130 m. In flight, the recommended height is between 15 and 85 m above ground. The laser has a wavelength of 905 nm.
For those who must deliver technical surveys, being able to trust the data matters. Scanfly EVO offers 3 cm precision and accuracy, measured as RMS 1σ at a distance of 50 m in PPK post-processing with open-sky GNSS. The LiDAR head measures distance with an accuracy of 10 mm and a precision of 5 mm.
The survey grade inertial navigation system records the position and attitude of the instrument with a 200 Hz IMU (1 kHz internal rate). The 336-channel GNSS receiver works with GPS, GLONASS, BeiDou, Galileo, QZSS and SBAS in PPK mode, so the trajectory is accurately reconstructed during processing.
Scanfly EVO adapts to the type of survey with dedicated mounting kits and RGB cameras, all sold separately.
The 3DT-SF-v3-LMK kit lets you mount Scanfly EVO on a vehicle or carry it on your back with the backpack. This way the same sensor surveys both from the car and on foot. When installed in a 3DT kit, the system has IP65 protection and CE marking.
With the 3DT-SF-v3-SKY adapter, Scanfly EVO attaches to drones with a DJI Skyport mount and becomes an aerial survey system. In flight, the recommended height above ground is between 15 and 85 m, with a maximum range of 130 m and up to 1,280,000 points/s.
To add color and images to the LiDAR data, Scanfly EVO supports a 24 MP UAV camera and a 360° global shutter panoramic camera, 48 MP, made up of 4 x 12 MP cameras that generate 32 MP panoramic images. The multi-sensor interface handles camera triggering. The cameras are sold separately.
Starting a survey must be immediate, even in the field. Scanfly EVO is controlled with the capacitive touch button on the instrument and with the included Scanfly WebApp, and it has integrated WiFi. To configure and follow the acquisition in real time from a PC there is SmartSurvey for Windows, sold separately.
Data is saved to a removable 256 GB external USB 3.2 flash drive, so it can be taken off the instrument without cables. Power is supplied through the USB-C port with USB Power Delivery 2.0 or from a 12-24 V source (max 30 W). The 56-pin multi I/O interface carries power, Ethernet, camera trigger/strobe and GNSS.
Scanfly EVO combines a multichannel LiDAR head, survey grade inertial navigation and multi-constellation GNSS in 1.6 kg, cable-free. A single system to survey from the drone, the backpack or the car, with a continuous workflow all the way to the point cloud.
With the backpack kit, Scanfly EVO is carried on the operator's back and the survey is done on foot. With a sensor of only 1.6 kg the operator moves freely, while the touch button and the Scanfly WebApp allow the acquisition to be managed.
With the 3DT-SF-v3-SKY adapter, Scanfly EVO mounts on drones with a DJI Skyport mount. The recommended flight height is between 15 and 85 m, with a maximum range of 130 m and up to 1,280,000 points/s. The supported RGB cameras, sold separately, add images to the LiDAR data.
On the roof of the car, with the 3DT-SF-v3-LMK kit, Scanfly EVO surveys the route as you drive, capturing up to 1,280,000 points/s. The 336-channel GNSS receiver and the survey grade inertial navigation system record the trajectory, and the supported RGB cameras, sold separately, add images.
The Scanfly EVO mounting accessories attach without tools and the system is cable-free. When installed in a 3DT mounting kit it has IP65 protection and CE marking, and works from -10 °C to +40 °C.
The heart of Scanfly EVO is a 32-channel LiDAR head with a 905 nm laser, rotating at 5 to 20 Hz. It measures distance with an accuracy of 10 mm and a precision of 5 mm, for dense and reliable point clouds.
The Scanfly WebApp, integrated in the system and included, lets you control the instrument, which also has integrated WiFi. For those who prefer to work from a PC, SmartSurvey for Windows is used to configure the system and to control the acquisition in real time. SmartSurvey is sold separately.
After the survey, SmartProcessing Lidar processes the Scanfly EVO data and generates point clouds in a few clicks, with a continuous workflow from acquisition to the final result. SmartProcessing Lidar is included with Scanfly EVO; for the analysis of mobile mapping data there is also SmartProcessing.
SmartProcessing Lidar supports SLAM and includes the GCP and Strip Alignment tool, as well as the image blurring tool for images. These are the tools through which the data captured by Scanfly EVO becomes the final point cloud.
Scanfly EVO is a multi-platform system: it is used airborne on drones with a DJI Skyport mount, on foot with the backpack and on a vehicle. The 3DT-SF-v3-SKY and 3DT-SF-v3-LMK mounting kits are sold separately.
Scanfly EVO captures up to 1,280,000 points per second with a maximum range of 130 m. In flight, the recommended height is between 15 and 85 m above ground.
Scanfly EVO has 3 cm precision and accuracy, measured as RMS 1σ at a distance of 50 m, in PPK with open-sky GNSS. The LiDAR head measures distance with an accuracy of 10 mm and a precision of 5 mm.
Scanfly EVO weighs 1.6 kg and measures 181×133×142 mm. It is transported in its case.
Scanfly EVO supports a 24 MP UAV camera and a 360° global shutter panoramic camera, 48 MP, with 4 x 12 MP cameras that generate 32 MP panoramic images. The cameras are sold separately.
Scanfly EVO is controlled with the capacitive touch button, with the included Scanfly WebApp, and with SmartSurvey for Windows, sold separately. Data is saved to a removable 256 GB external USB 3.2 flash drive.
The data is processed with SmartProcessing Lidar, included with Scanfly EVO, which supports SLAM and includes the GCP and Strip Alignment and Image blurring tools.
The 3D TARGET technical and sales team offers a free consultation to recommend the configuration best suited to your operational needs. Use the Request more information button on this page.
Aerial surveys with drone | Mobile mapping on a vehicle | On-foot surveys with the backpack
Our technical and sales team is ready to offer you a free consultation to discover Scanfly EVO and recommend the solution best suited to your operational needs. Contact the 3D TARGET experts.
Data sheet
Scanfly EVO is the 3DT multi-platform mobile mapping LiDAR system: compact and cable-free, up to 1,280,000 points/s with a range of 130 m and a precision of 3 cm, at just 1.6 kg.
